Текст страницы
M2Q_SB
80
60
42
M.2 EZ-Latch Plus
M.2 EZ-Latch Click
M.2 EZ-Latch Plus
M2N_SB
80
110
60
42
•• M2Q_SB:
Step 1:
Turn the M.2 EZ-Latch Click clip on the M2N_SB connector clockwise and remove the motherboard
heatsink.
Step 2:
Insert the M.2 SSD into the M.2 connector at an angle. Press down on the front end of the M.2 SSD
and make sure the M.2 SSD is secured by the clip.
Step 3:
Remove the protective film from the bottom of the motherboard heatsink, and finally, turn the M.2
EZ-Latch Click clip clockwise and then install the heatsink back in place.
•• M2N_SB:
Step 1:
Turn the M.2 EZ-Latch Click clip clockwise and remove the motherboard heatsink. Locate the proper
mounting hole for the M.2 SSD to be installed.
If you want install an M.2 SSD in the 110mm hole, remove the EZ-Latch Plus clip from the
80mm hole first.
Step 2:
Insert the M.2 SSD into the M.2 connector at an angle. Press down on the front end of the M.2 SSD
and make sure the M.2 SSD is secured by the clip.
Step 3:
Remove the protective film from the bottom of the motherboard heatsink, and finally, turn the M.2
EZ-Latch Click clip clockwise and then install the heatsink back in place.
* Types of M.2 SSDs supported by each M.2 connector:
M.2 PCIe x4 SSD
M.2 PCIe x2 SSD
M.2 SATA SSD
M2A_CPU
a
a
r
M2Q_SB
a
a
r
M2N_SB
a
a
r
&
&
Please visit GIGABYTE's website for details on using M.2 EZ-Latch Click/M.2 EZ-Latch Plus.
M.2 SSD installation with M.2 EZ-Latch Click: https://www.gigabyte.com/WebPage/1048/M.2-EZ-Latch-Click.html
M.2 SSD installation with M.2 EZ-Latch Plus: https://www.gigabyte.com/WebPage/920/M2-latchplus.html
M.2 SSD removal with M.2 EZ-Latch Plus: https://www.gigabyte.com/WebPage/921/removeM2.html
* Motherboard heatsink design may vary by model.
- 26 -