Текст страницы
7) SATA3 4/5/6/7 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support RAID 0,
RAID 1, RAID 5, and RAID 10. Please navigate to the "Configuring a RAID Set" page of GIGABYTE's
website for instructions on configuring a RAID array.
1
7
1
7
5
7
SATA3
4
6
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
SATA3 4/5/6/7
To enable hot-plugging for the SATA ports, please navigate to the "BIOS Setup" page of GIGABYTE's
website and search for "SATA Configuration" for more information.
8) M2Q_SB/M2N_SB (M.2 Socket 3 Connectors)
The M.2 connectors on the motherboard support only M.2 PCIe SSDs.
M2Q_SB
80
M2N_SB
80
M2Q_SB
M2N_SB
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
•• M2Q_SB/ M2N_SB:
Step 1: Pull the clip's tab up and out of the mounting hole. Slide the M.2 SSD into the connector at an
angle.
Step 2: Press the M.2 SSD down and then secure it by pressing the clip's tab into the mounting hole.
* Types of M.2 SSDs supported by each M.2 connector:
M.2 PCIe x4 SSD
M.2 PCIe x2 SSD
M.2 SATA SSD
M2Q_SB
a
a
r
M2N_SB
a
a
r
- 21 -