Текст страницы
B. Installing the CPU
Follow the steps below to correctly install the CPU into the motherboard CPU socket.
Finger Tab
u
l
k
j
Gently press the CPU socket lever
handle down and away from the socket.
k
Completely lift up the CPU socket lock
ing lever.
l
Use the finger tab on the side of the
metal load plate to lift open the metal
load plate with the plastic protective
cover attached to it.
j
Pin One
v
Hold the CPU with your fingers by the
edges. Align the CPU pin one marking (tri
angle) with the pin one corner of the CPU
socket (or you may align the CPU notches
with the socket alignment keys) and gently
insert the CPU into position.
w
j
k
l
Make sure the CPU is properly installed
and then close the load plate. The plastic
protective cover will pop off, just remove it.
Secure the lever under its retention tab to
complete the installation of the CPU.
* Always replace the plastic protective
cover when the CPU is not installed to pro
tect the CPU socket.
Do not force to engage the CPU socket locking lever when the CPU is not installed correctly
as this would damage the CPU and CPU socket.
- 13 -