Текст страницы
1、BIOS Introduction
1.1 BIOS Description
BIOS is called Basic Input/Output System. When you turn on your computer, BIOS is the
first program to run, and the modified BIOS data will be stored in a CMOS RAM maintained
by the battery, and will not be lost when the power is cut off. Normally, no BIOS modification
is necessary when the system is running normally, but if the CMOS data is lost due to
battery depletion, the battery has to be replaced and the BIOS value has to be reset.
Note: BIOS interface options and functions may vary depending on the actual version,
please refer to the actual version.
1.2 BIOS Operating Instructions
1.2.1 Instructions for entering BIOS
To enter the BIOS setup program screen, please follow the steps below:
Turn on the power or reboot the system and wait until the screen displays "Press<DEL>to
enter setup.";
Press <DEL> to enter the BIOS setup program.
1.2.2 BIOS Mouse Instructions
Left->Select, Right->Exit
1.2.3 BIOS Keyboard Instructions
< → >/< ←>
The next display screen selected to the right or left
< ↑ >/< ↓>
Up or Down Selection
<Enter>
Select a value or option
< + >/< - >
Changing values or selections
< F1 >
Topic help,available only in the Status Display menu and
the
Selection Settings menu
< F7 >
Discard the changes made and use the value set before
the
modification.
< F9 >
Load preset optimization settings
21
< F10 >
Save the changed CMOS settings and exit
< ESC >
Exit