Текст страницы
JSLOW1: Slow Mode Booting Jumper
This jumper is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.
Normal
Enabled
(Default)
(Please enable this jumper
during BIOS POST.)
JLN1~2: Low Temperature Booting Jumpers
These jumpers allow liquid nitrogen cooling system to boot at an extremely low
temperature. Please try to enable the jumper to help the system boot successfully.
Enabled
Normal
(Default)
(Please enable this jumper
during BIOS POST.)
⚠Important
∙Please note that overclocking at an extremely low temperature carries the risk of
system instability and may cause damages to the system.
∙The overclocking results may vary depending on the CPU you use.
∙Do not enable the jumper when the system is power off. Otherwise, the system will
be unbootable.
51