Текст страницы
Chapter 2
Connect the Hardware
The back area of the router is used for heat dissipation. It works best when the router is mounted
on a wall.
Method TWO: Via mounting bracket
Method ONE: Via 3M Adhesives*
1. Tear off the protective paper from the
3M adhesives on the back of the
router.
1. Mount the bracket on the wall in the
correct direction with the two provided
anchors and screws.
*2 extra 3M adhesives are
provided for future use.
Anchor
UP
3M Adhesives
Tip: You can use the included
spirit level to help install the
bracket horizontally.
Screw
UP
The air bubble in the
level is centered.
2. Attach the router on the bracket as shown
below.
2. Adhere the router vertically to a flat
surface that is out of children’s reach.
UP
Note: This equipment shall
be installed at a height of
less than 2 meters.
CAUTION:
3M adhesives may
damage the wall or leave
adhesive residue on the
wall when removed.
Caution, Hot Surface
The device should be used within a temperature range of 0°C-40°C.
When the router is working, the temperature on its back is high. Do not touch the router with bare hands, and do not stick or directly mount the
router to wallpaper, paper, wood, glass, non-heat-resistant paint, foam board, flammable and explosive materials, etc, to avoid burns,
discoloration, breakage or other accidental injury.
It is recommended to mount the router to flat and smooth painted walls, tile walls, and other objects. Do not stick it on metal surfaces, so as not
to shield the wireless signal.
9