Текст страницы
Quick Setup Guide
DCP-L2600D / DCP-L2620DW / DCP-L2622DW / DCP-L2625DW / DCP-L2627DW /
DCP-L2627DWXL / DCP-L2627DWE / DCP-L2640DN / DCP-L2660DW / DCP-L2665DW / MFC-L2802DN /
MFC-L2800DW / MFC-L2802DW / MFC-L2827DWXL / MFC-L2827DW / MFC-L2835DW / MFC-L2860DWE /
MFC-L2860DW / MFC-L2862DW / MFC-L2886DW / MFC-L2920DW / MFC-L2922DW / MFC-L2960DW / MFC-L2980DW
D031GF001-00
UK
Version A
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother support website: support.brother.com/manuals EN
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
NOTE:
• The components included in the box may differ depending on your
country.
• The available connection interfaces vary depending on the model.
If you use a wired connection, you must purchase the correct cable for
the interface you want to use.
Toner Cartridge and Drum Unit
Assembly
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
Toner Cartridge Replacement
(DCP-L2627DWXL /
MFC-L2827DWXL only.
Save for later use.)
• Network cable (for wired network models only)
Use a straight-through Category 5 (or greater) twisted-pair cable.
AC Power Cord
Quick Setup Guide
Product Safety Guide
• The screens and images in this Quick Setup Guide show the
MFC-L2860DW.
• Brother aims to reduce waste and save both raw materials and the
energy required to produce them.
Read more about our environmental work at www.brotherearth.com.
• Save all packing materials and the box in case you must ship your
machine.
1 Remove the packing materials and install the toner cartridge and drum unit assembly
1
2
1
Remove the orange part.
Push firmly.
2 Load paper in the paper tray
Do not exceed this mark.
Adjust the paper
guides.
3 Connect the power cord and turn the machine on
4 Select your country/language (Initial setup only)
After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.
Back
Front
NOTE:
Before connecting the power cord, locate the Serial Number
label on the back or side of the machine. Record this number
for product registration and warranty support.