Текст страницы
D01YPH001-00
10
Select your language (if needed)
9
Machine settings
Follow the LCD instructions to configure the machine settings.
1. Press
[Settings] > [All Settings] > [Initial Setup]
> [Local Language].
2. Press your language.
3. Press
.
• Configure the tray settings and check the paper orientation information (not
available on all models).
• Check the software installation information.
11
Connect the telephone line cord
If you are not using your machine as a fax, go to 12 . For more information on using the fax feature, see the Online User’s Guide.
(For Europe) We can send you a genuine Brother cord free of charge if you need one. To contact us, visit www.brother.eu.
(Example for UK)
Connect the telephone line cord. Use the socket
marked LINE and guide the cord out the back of the
machine.
Lift the scanner cover.
Close the scanner cover.
12 Connect your computer or mobile device to your machine Follow these steps to complete the setup using one of the connection types available on your machine.
Setup Finished
Visit setup.brother.com to download and install
Brother software.
Follow the on-screen instructions and prompts.
setup.brother.com
NOTE
For Wired Network Connection and USB Connection,
locate the correct port (based on the cable you are using)
inside the machine as shown.
You can now print and scan using your machine.
To check for the latest firmware, visit
support.brother.com/up7.
Important Notice for Network Security:
The default password to manage this machine’s
settings is located on the back of the machine
and marked “Pwd”. We recommend immediately
changing the default password to protect your
machine from unauthorised access.
Can’t Connect? Check the following:
Wireless network
Restart your wireless access point/
router (if possible).
If still not successful, go to 13 .
Restart your machine and
computer, and then go to 12 .
Wired network
Disconnect the cable.
If still not successful, visit support.brother.com
for FAQs and Troubleshooting.
USB connection
13 Manual wireless setup If the wireless setup is not successful, try to set up the connection manually.
Find your SSID (Network Name) and Network Key
(Password) on your wireless access point/router
and write them in the table provided below.
Go to your machine,
and press
SSID (Network Name)
>
[Find Wi-Fi Network] >
[Yes].
Network Key (Password)
Go to 12 to install software.
Select the SSID (Network
Name) for your access point/
router and enter the Network Key
(Password).
When the wireless setup is
successful, the LCD displays
[Connected].
SSID: XXXXXXX
Network Key: XXXX
If setup is not successful, restart
your Brother machine and your
wireless access point/router, and
repeat 13 .
If you cannot find this information, ask your network
administrator or wireless access point/router
manufacturer.
For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals.
© 2021 Brother Industries, Ltd. All rights reserved.