Текст страницы
6. Preparing the Ink System
7 Replace the tank cap securely.
1 Press the Black button and confirm that
(Ink
icon) disappears.
ENGLISH
8 Close the ink tank cover.
Turns off
Ink preparation takes about 5 to 6 minutes.
Proceed to the next page.
9 Repeat steps 2 to 8 to pour all ink into the corresponding ink tanks on the right according to the label.
If any of the following screens
appear
Ink icon
Number or letters
Confirm that the ink has been filled to the upper
limit line (A).
The cartridges are not installed correctly.
"3. Installing the Cartridge" on page 1
(A)
No cartridges are installed.
"3. Installing the Cartridge" on page 1
The protective materials are not removed.
"2. Removing Packing Materials" on page 1
10 LIFT UP the scanning unit / cover, and then close it.
a
b
Ink is not prepared normally.
Press the ON button to restart the printer, and
then see "5. Pouring Ink" on page 2.
Waiting to prepare ink.
"6. Preparing the Ink System"
If you have not poured ink into the ink tank yet,
see "5. Pouring Ink" on page 2.
For all other cases, refer to the Online Manual.
3