Текст страницы
ENG
Wireless microphone
CONNECTION AND OPERATION
Attention! Before using, fully charge the battery.
Charging the battery
• Connect the microphone and receiver to the USB port of your PC or USB charger using the
USB to USB type-C cable (included). When charging, the indicator lights red. When the battery
is fully charged, the indicator goes out. A flashing red indicator on the microphone/receiver
means the battery is low. The microphone/receiver needs to be charged.
• The battery is used as an integral part of the equipment, so do not attempt to remove
or replace it, as this may void the warranty or damage the device itself.
PREPARING TO USE THE MICROPHONE
Turn on the microphone by long pressing the button a. The green indicator will light.
PREPARING TO USE THE RECEIVER
• Turn on the receiver by long pressing the button c. The green indicator will light.
• Connect the receiver to the 6.3 mm jack connector of the speaker system, sound card,
music center or amplifier. If necessary, use the 6.3 mm jack - 3.5 mm mini jack adapter
(not included).
• Adjust the required volume using buttons d and e.
PAIRING THE MICROPHONE WITH THE RECEIVER
After turning on the microphone and receiver, they will be connected automatically
(continuous green light on microphone). If not (green microphone indicator flashes), follow
these steps to connect manually:
• Turn on the microphone. The green indicator on the microphone will flash.
• Turn on the receiver. The yellow (yellow and/or blue for the MK-742 model) indicator
on the receiver will flash.
• Quickly press the power button c 10 times on the receiver.
• Quickly press the power button a 10 times on the microphone.
• After this, the microphone and receiver will be paired. The indicator on the microphone
will light green constantly. On the receiver, the yellow (yellow and blue for the MK-742
model) indicator will light constantly.
4