Инструкция миксер Centek CT-1129

- Ensure that the mixer is turned off when not in

use!
- Do not use the appliance at ambient

temperatures below 0 ºС and above 35 ºС.
- Do not leave the plug in the socket if:

• Lid - 1 pc.
• Mixing attachment - 2 pcs.
• Whipping attachment - 2 pcs.
• Spatula - 1 pc.
• User Manual - 1 pc.

1. OPERATING PROCEDURE
2. Before connecting the mixer to power supply,

• if the appliance doesn’t work properly
(excessive noise, vibration, etc.);
• during cleaning;
• before and after each use.
- Do not pull or carry the appliance by its power

ATTENTION! Fire Hazard! Do not allow the appliance
to contact with flammable liquids and combustible
materials!
In case of damage to the power cable or any other
part of the appliance immediately disconnect it
from power supply and apply to a service centre
authorized by the Manufacturer. In case of an
unauthorized intervention into the appliance or
non-observance of the operating requirements
listed in the present manual the Manufacturer’s
warranty will become void.

cord.
- Disconnect the appliance from power supply

ensure that your hands are completely dry! Thor­
oughly rinse all attachments, inner and outer
bowls, lid and spatula before the first use. Let
all parts dry.
2. Insert the inner bowl into the outer bowl, place the

ATTENTION! Never submerge the appliance body,
power cable and plug in water or any other liquids.

before maintenance and if the appliance doesn’t
work properly (excessive noise, vibration, etc.).
- Before disconnecting the appliance from power

ingredients inside. Put the lid on the bowl and turn
it clockwise until it locks with a click. You can add
ingredients into the bowl at any time through the
inspection window. The quantity of the ingredients
should not exceed 2 l for the inner bowl and 2.5 l
for the outer bowl; otherwise they might overflow
during mixing.
3. Insert the required attachments into the sockets

supply ensure that the speed selector is in the
“0” position. Grab the plug, not the power cable.
In case of power cable damage it should be
replaced, to avoid dangerous situations, by the
Manufacturer, a service centre or similar skilled
personnel.
- Do not attempt to repair the fan or to replace any

of the mixer. Only one of the attachments of each
set, i.e the one with the sprocket, can be inserted
in the bigger socket of the motor unit, the other
can be inserted into the smaller socket.
4. Remove the spatula from the lid; insert the mixer

parts yourself. If any malfunctions occur, apply to
the nearest service centre.
- Special
instructions
for
transportation
(shipment) and sale: none.
- Should You decide to transfer the appliance to

1. APPLIAANCE DESCRIPTION
2. Spatula
3. Mixer release button
4. Inspection window
5. Lid
6. Inner bowl
7. Outer bowl
8. Attachment release button
9. Speed selector
10. “ТУРБО” mode button
11. Mixer
12. Whipping attachments
13. Mixing attachments

another person, please pass the present manual
over along with it.

through the opening after ensuring that the notch
in the bottom of the mixer is aligned with the lock­
ing lugs in the bowl lid. Press on the handle to
lock the handheld mixer in place; it will engage
with a click.
5. Ensure that the speed selector switch is in the

• SCOPE OF SUPPLY
• Mixer - 1 pc.
• Inner bowl - 1 pc.
• Outer bowl - 1 pc.

“0” position. Connect the device to power supply.

ATTENTION! Risk of injury! Never touch the rotating
attachments with bare hands, replace attachments
only after the motor has come to a full stop!

15