Текст страницы
ENGLISH
Explanation of general view
21
Aluminum base type
22
Guide facing
23
Fence guide
24
Threaded knob
25
Pin
26
Anti-splintering device
27
Protrusions
28
Aluminum base
29
Cover plate
1
Cutting action changing lever
2
Switch trigger
3
Lock button
4
Speed adjusting dial
5
Blade holder
6
Bolt
7
Hex wrench
8
Blade
9
Roller
10
Hook
11
Retainer
12
Base
13
Dust cover
14
Cutting line
15
Edge
16
Graduation
17
Starting hole
18
Hose
19
Steel base type
20
Rip fence (Guide rule)
SPECIFICATION
Model
4326
4327
4328
4329
Length of stroke
18 mm
18 mm
18 mm
18 mm
Blade type
B type
Wood
65 mm
65 mm
65 mm
65 mm
Max. cutting
capacities
Mild steel
6 mm
6 mm
6 mm
6 mm
Strokes per minute (min–1)
3,100
500 – 3,100
500 – 3,100
500 – 3,100
Overall length
217 mm
(Steel base type)
217 mm
(Steel base type)
217 mm
223 mm
223 mm
(Aluminum base type)
223 mm
(Aluminum base type)
Net weight
1,8 kg
(Steel base type)
1,8 kg
(Steel base type)
1,8 kg
1,9 kg
1,9 kg
(Aluminum base type)
1,9 kg
(Aluminum base type)
Safety class
/II
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Note: Specifications may differ from country to country.
Work area safety
1.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
Electrical safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6.
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
7.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
7