Текст страницы
ELECTRIC OVEN
• It is not recommended to install the appliance near refrigerators or freezers, in order to
reduce their performance.
• The buyer is responsible for installing the appliance. Assistance provided by the manufacturer
due to incorrect installation is not included in the warranty.
ELECTRICAL CONNECTION
ATTENTION! The appliance must be connected to the main electrical network
in accordance with applicable laws and regulations.
• Make sure that the power from the main network is sufficient for the power supply system is
grounded in accordance with current regulations, and the power cable does not come into
contact with the heated elements.
• Do not use adapters, extension cords, or «tees» to connect the appliance.
• If you need to replace the power cord, make sure that it meets current standards and meets
the product specifications.
GROUNDING
• This appliance requires grounding to protect it from short circuits and electrical
dissipation. It is equipped with a grounded plug installed on the power cord. Therefore,
the appliance must be connected to an appropriate electrical outlet.
• The installation, connection and grounding of the electrical system must correspond to
the provisions of European standards, as well as applicable local regulations.
• The ground cable must not be interrupted by a switch. If your apartment does not have
a ground connection, contact a qualified electrician to install it.
ATTENTION! Before servicing the product, turn off the electrical power completely.
The manufacturer is not responsible for any direct or indirect damage caused by incorrect
installation or connection. Therefore, all installation and connection operations must be
performed by qualified personnel in accordance with applicable local and general regulations.
EXPLOITATION
1. After storing the appliance in a warehouse or transporting it at a temperature below
15 °C, it must be kept at room temperature for at least 6 hours before switching it on.
2. Check the power supply characteristics, then connect the appliance to a power
source.
3. Make sure that the air vents are not closed. Open the window for air circulation.
4. Set the power controls to the maximum level. Heat an empty oven for 5 – 10 minutes.
ATTENTION! When you connect the appliance for the first time, you may see an
unpleasant smell of burning, this is considered the norm, because the outer surface of
the heating elements may contain factory insulation materials necessary for corrosion
protection. It will disappear after 5 minutes.
22
USER GUIDE