Текст страницы
ELECTRIC OVEN
LEG INSTALLATION
STEP-2
Attach the fixed tabs first, regardless of di-
rection.
STEP-1
Align the leg plastic as shown in the
image.
STEP-3
STEP-4
Then
attach
the
movable
tab
with light force.
Please use the legs together with the
footings on top.
INSTALLATION AND CONNECTION
This product should be installed and used in strict accordance with the instructions in this
manual and with applicable state and local standards and regulations.
• The room must be well ventilated, with ventilation installed, make sure that it is well ventilated.
Consult your qualified installer if you are not sure what kind of ventilation you will need.
• Vents must have a cross-section of at least 100 cm and must be protected from accidental
blocking (protection with metal bars or nets). Make sure that there is no other furniture
behind the back of the stove.
• The air flow between the adjacent room and the room where the appliance is installed must
be free through permanent openings (which can be obtained by increasing the gap between
the door and the floor).
• The stove must be installed steadily on a flat surface away from heating appliances and
materials.
• All furniture adjacent to the gas stove must withstand a temperature of at least 85°C above
23
USER GUIDE