Текст страницы
one of which is EARTH.
THE COMPLETE SET INCLUDES:
1. Adjustable spray nozzle;
Switch off the machine immediately in case of:
2. Pressure hose;
3. Filter.
14. Malfunction in the mains plug, power cable or dam
aging of cable.
15. Broken switch.
Product Life:
16. Smoke or stench of scorched insulation.
The service life of the product is 5 years.
Production date:
Specific safety rules
Is indicated on the packaging of the goods.
Shelf life:
• Do not disconnect the plug by pulling on the electrical
cable.
Shelf life is not limited (subject to storage conditions).
Storage conditions:
• If you are too far from the object you wish to clean, do
not move the cleaner nearer by pulling on the high pres
sure hose; use the handle provided.
• Do not obstruct the ventilation grilles during opera
tion.
Products are stored in dry, ventilated warehouses at tem
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80%.
Transportation:
It is strongly prohibited dropping and any mechanical
impact on the packaging during transportation.
• The cross-section of any extension cables used must
be proportional to their length, i. e. the longer the exten
sion cable, the greater the cross-section; cables with a
protection level of “IPX5” must be used.
• Position the high pressure cleaner AS NEAR POSSIBLE
to the water supply.
When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of pack
ing clamping.
SERVICE
• Use the high pressure cleaner only with accessories
and replacement parts authorized by the manufacturer.
The use of original accessories and replacement parts
will ensure safe, trouble-free operation.
Have your power tool serviced by a qualified repair per
son using only identical replacement parts. This will en
sure that the safety of the power tool is maintained.
• Avoid unintentional firing of the trigger. Do not carry
the lance / trigger assembly with your hand over the trig
ger. Always use the trigger lock mechanism.
SAFETY INSTRUCTIONS
• Ensure that the safety lock on the trigger is used, when
you have stopped using the pressure washer to prevent
accidental operation.
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury. Read the fol
lowing safety instructions and also the enclosed safety
instructions.
• Do not use the cleaner with inflammable or toxic liq
uids, or any products which are not compatible with the
correct operation of the high pressure cleaner.
Keep these instructions in a safe place!
• Do not direct the water jet towards the unit itself, elec
trical parts or towards other electrical equipment.
Electrical safety
• Do not allow children or incompetent persons to use
the high pressure cleaner.
Always check if your mains voltage corresponds with
the value on the type plate.
• Do not touch the plug and/or socket with wet hands.
• Do not use the high pressure cleaner if the electrical
cable is damaged.
When replacing old cables or plugs: throw away old
cables or plugs immediately as soon as new ones have
replaced these. It is dangerous to put the plug of a loose
cable into the socket outlet.
• Do not use the high pressure cleaner if the high pres
sure hose is damaged.
When using extension cables:
• Do not jam the trigger in the operating position.
Only use an approved extension cable that is suitable for
the machine’s power. The cores must have a diameter of
at least 1. 5 mm2. When the extension cable is on a reel,
unroll the cable in its entirety.
• Check that the data plates are affixed to the high pres
sure cleaner, if not, inform your dealer. Cleaners without
plates must NOT be used as they are unidentifiable and
potentially dangerous.
• Do not tamper with or alter the calibration of the safety
valve.
All electrical connections e. g. extension cable, must be
of an approved waterproof type for outdoor use and
marked accordingly. Extension cables must be threecore,
11