Текст страницы
OBJ_BUCH-2981-002.book Page 13 Wednesday, April 26, 2017 3:49 PM
English | 13
or other raised areas ensuring that
you can see any edges at all times.
High-pressure hoses, fittings and
couplings are important for the safety
of the appliance. Use only hoses, fit-
tings and couplings recommended by
the manufacturer.
Only clean or filtered water should be
used for intake.
Only use detergents recommended
by the manufacturer. Comply with
the application, disposal and warning
instructions of the detergent manu-
facturers.
Application
All current-conducting components
in the working area must be protect-
ed against splashed water.
The gun trigger must not be jammed
in position “ON” during operation.
Before use, check that the unit and
operating equipment are in perfect
condition and are safe to operate. Do
not use the unit if it is not in perfect
condition.
Do not direct the jet against yourself
or others in order to clean clothes or
footwear.
Wear suitable protective clothing to
protect against splash water. Do not
use the machine in reach of persons,
unless these are also wearing protec-
tive clothing.
If necessary wear personal protective
equipment (PPE) e. g. safety goggles,
breathing protection etc to protect
against water, particles and/or aero-
sols sprayed back from parts.
Do not use solvent-containing liq-
uids, undiluted acids, acetone or sol-
vents! This includes petrol, paint thin-
ners, heating oil. The sprayed vapour
is highly flammable, explosive and
toxic.
During use of high pressure clean-
ers, aerosols may be formed. Inha-
lation of aerosols can be hazardous to
health.
The appropriate safety regulations
must be observed when using the unit
in dangerous areas (e. g. petrol sta-
tions). It is forbidden to operate the
unit in potentially explosive locations.
The unit must be placed on a solid
base.
High pressure may cause objects to
rebound. If necessary wear suitable
personnel protective equipment such
as safety goggles.
Take care if using the machine in a
confined space ensuring that there is
adequate ventilation. Ensure that all
vehicles are switched off at all times
whilst cleaning.
Vehicle tyres/tyre valves may only be
cleaned from a minimum distance of
30 cm in order to avoid damages by
the high-pressure jet. The first indica-
tion of damage is the discolouration
of the tyre. Damaged vehicle tyres/
tyre valves are dangerous to life.
Operation of this machine requires
both hands to be used at all times. Do
not operate from a ladder. Take care
when using the machine on balconies
Materials containing asbestos and
other materials which contain sub-
Bosch Power Tools
F 016 L81 568 | (26.4.17)