Текст страницы
• Pull the lever towards you and remove
the ice maker tray
• Fill with water to the marked level
• Hold the left end of the lever and set the
ice-tray on the icebox
• When ice cubes have formed, twist
the lever to drop the ice cubes into the
icebox.
Do not fill the icebox with water in
order to make ice. It will break.
3.5.3 The Door-Icematic (In some
models)
Important installation instructions
This appliance is designed to work in
difficult climate conditions and is powered
with ‘Freezer Shield’ technology which
ensures that the frozen food in the
freezer will not defrost even if the ambient
temperature falls as low as -15 °C. So
you may then install your appliance in an
unheated room without having to worry
about frozen food in the freezer being
spoilt. When the ambient temperature
returns to normal, you may continue using
the appliance as usual.
(The images are representative)
3.5 Accessories
Visual and text descriptions in the
accessories section may vary according
to the model of your appliance.
3.5.1 Ice Tray (In some models)
• Fill the ice tray with water and place in
the freezer compartment.
• After the water has completely frozen,
you can twist the tray as shown below to
remove the ice cubes.
3.5.2 The Icematic (In some models)
(The images are representative)
• Pull the lever towards you and remove
the ice maker tray
• Fill with water to the marked level
• Hold the lever and set the ice-tray above
the icebox .
• When ice cubes have formed, twist
the lever to drop the ice cubes into the
icebox.
• Reach the ice cubes with rotating icebox.
• Icebox can be pulled out from door-
icematic after rotation motion
Do not fill the icebox with water in
order to make ice. It will break.
EN - 36