Текст страницы
Self-Cleaning
The cleaner can clean the roller brush and pipeline automatically on Self-Cleaning Base:
1). Please make sure there is enough clean water in the clean water tank, empty dirty
water tank before self-cleaning.
2). Place cleaner on the charging station (1), plug in the power supply well.
3). Press the Self-Cleaning button (2), the indicator will be white and flash slowly, and
the cleaner will spray the clean water, clean the roller brush and pipeline automatically,
meanwhile, it will vacuum the dirty water into the dirty water tank.
4). Please unplug the power supply and clean the dirty water tank once the self-cleaning
mode finished to avoid getting stinky.
NOTE: The Self-Cleaning can only be applied when charging on the charging station.
Self-Cleaning Button
(1)
(2)
Care and Maintenance
Please unplug the power supply, turn off the switch, and remove the battery pack out
before care and maintenance.
1. For daily care and maintenance, use a soft dry mop to wipe the main body, the
charging station; use a soft moist cloth to wipe the brush base, scraper, infrared sensor.
2. Roller Brush Cleaning
After the completion of self-cleaning, the machine automatically enter the air-drying
mode, brush and base fan open at the same time, the default running time of 1 hour,
if you want to adjust the air-drying time, manually press the air-drying button, air-drying
process, brush slow rotation (if you want to stop the brush rotation, long press the handle
on/off button for 1 second).
Air-Drying Button
ECO/MAX
Power
Button
11