Текст страницы
the brushroll box to dry); Rinse off the dirt attached to the multi-function cleaning brush and place it in the
brushroll box.(Fig 25)
Note: Do not wash floorhead ！
Maintenance and Storage
It is recommended to clean the dirty water tank, filter, brushroll and brushroll window after each use. If there
is any of below situation: ( ① Remove dust cup and find HEPA filter leaks dust;
②Foam filter severely
damaged; ③The brushroll has serious hair loss,or has strong vibration and abnormal noise during use), it is
recommended to purchase consumables and replace it to avoid machine performance. When not using the
machine for a long time, please keep the machine in a cool and dry place, never in direct sunlight or humid
environment. If you need to pack the machine into a box, be sure to clean the machine and dry the parts to
prevent damage to the machine.
Chapter 4 Troubleshooting
Please check the following points before contacting the after sale service.
Problem
Possible cause
Solution
No or Low battery power
Recharge and use in time
On/off button is not pressed down
Press down on/off button
Brushroll is entangled
Clean brushroll in time
Dirty water tank full
Clean dirty water tank
Can not start or stop
during use
Battery pack not assembled properly
Reassemble battery pack
Suction inlet blocked
Clean suction inlet and filter
Battery pack is not in place
Install the battery pack
Suction inlet blocked
Clean suction inlet and filter
Weak suction
No HEPA assembled
Assemble HEPA
Suction inlet blocked
Clean suction inlet and filter
Abnormal noise
No HEPA assembled
Assemble HEPA
Clean water tank empty
Fill clean water tank
Spray mouth does
not spray water
Water spray button not pressed
Press water spray button
12