Текст страницы
9
EN
ATTENTION!
• To disassemble the meat grinder head (7), unscrew
the nut (11) by turning it counterclockwise, remove the
installed plate (10) from the meat grinder head (7) body,
remove the crossed blade (9) and the screw (8).
• To remove the meat grinder head (7), press the lock
button (3), turn the meat grinder head (7) clockwise and
remove it.
MAKING KEBBE
• Kebbe, kibbeh or kubba is a Mediterranean dish made of
beef or lamb meat, wheat flour and spices.
• Use the kebbe attachment (13) to make hollow rolls of
the base. Rolls are filled and deep fried. Experiment with
various fillings for the rolls.
• This is an approximate recipe for making kebbe, you can
find other recipes on the Internet.
-
When installing the blade (9), make sure that the
cutting edges of the blade (9) face the plate (10).
If the blade is installed improperly, it will not grind
meat.
-
The fine cutting plate (10) can be used for
processing both raw and cooked meat, fish, etc.
-
Use the medium plate (10) for processing raw meat,
fish, vegetables, dried fruit, cheese etc.
-
Use the coarse plate (10) for more coarse minced
meat.
-
Install the food tray (6) on the meat grinder head (7)
(pic. 3).
-
Insert the power plug into the mains socket.
-
Switch the meat grinder on by setting the operation
mode switch (1) to the position «ON».
Filling
Recommendations:
-
Lamb meat 100 g
-
Olive oil 1,5 table spoon
-
Onion (minced) 1,5 table spoon
-
Spice to taste
-
Salt ¼ tea spoon
-
Flour 1 table spoon or 1/2 table spoon
• Assemble the meat grinder (see the chapter «MAKING
MINCED MEAT»).
• Mince the lamb meat with the meat grinder once or twice.
• Fry the onion until golden, then add minced lamb meat,
spices, flour and salt.
-
Defrost frozen meat thoroughly. For better
processing, cut meat into strips (20x20x60 mm) or
cubes (20x20x20 mm).
-
During operation, use only the pusher (5) supplied
with the unit (pic. 3). Do not apply excessive effort
while pushing the meat or other products.
-
Do not push meat with your hands or any other
objects (pic. 2).
• After the operation is finished, switch the meat grinder
O by setting the operation mode switch (1) to the
position «O», unplug the unit and then disassemble it.