Текст страницы
IM021
Do not run the meat grinder continuously for longer
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Please read these operating instructions carefully
than 7 minutes. Turn the unit off and let it rest for at
least 7 minutes to cool down the motor, otherwise the
motor may be damaged.
Be sure to turn the appliance off after each use. Make
before connecting your device to the power supply, in
order to avoid damage due to incorrect use.
Before the first switching on check that the voltage
sure the motor stops completely before disassembling.
Do not overload the appliance with products.
If the product has been exposed to temperatures below
indicated on the rating label corresponds to the mains
voltage in your house.
Incorrect operation and improper handling can lead to
0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor
malfunction of the appliance and injuries to the user.
The appliance is intended for use only in domestic aims.
The unit is not intended for industrial and commercial
use, and also for use in:
kitchen area for the stuff of shops, offices and the
changes into the product design without prior notice,
unless such changes influence significantly the product
safety, performance, and functions.
Manufacturing date is indicated on the unit and/or on
other industrial places
farm houses
hotels, motels, rest homes and other similar places by
residents.
Do not use outdoors or in damp area.
Do not disassemble the appliance when it is
packing as well as in accompanying documents in the
following format XX.XXXX where first two figures XX is
the month of production, and following four figures
XXXX is the year of production.
BEFORE THE FIRST USE
Wash all parts (except body) in warm soapy water.
Before plugging in, ensure the appliance is switched
plugged to the power supply. Always unplug the
appliance from the power supply before cleaning and
when not in use.
To prevent risk of electric shock and fire, do not
off.
INSTRUCTION FOR USING
ASSEMBLING
Place the head tightly onto the head inlet.
Place the snake into the head, long end first, and turn
immerse the appliance in water or any other liquids. If it
has happened, unplug it immediately and check in
service center.
The appliance is not intended for use for physically,
to feed the screw slightly until it is set into the motor
housing.
Place the cutting blade onto the snake shaft with the
sensory or mental disabled person (including children)
or for person with lack of life experience or knowledge,
if only they are under supervision or have been
instructed about the use of the unit by responsible
person.
Children must be under control in order not to be
allowed to play with the appliance.
Do not leave the appliance switched on when not in
blade facing the front as illustrated. Place the desired
cutting plate next to the cutting blade, fitting protrusions
in the slots. If it is not fitted properly, meat will not be
ground.
Screw the fixing ring tightly. Do not overtighten.
Place the feed tray on the head and fix it into position.
Locate the unit on a firm surface.
The air passage at the bottom and the side of the motor
use.
Do not use other attachments than those supplied.
In case of power cord is damaged, its replacement
housing should be kept free and not blocked.
PROCESSING MEAT
Cut the meat into pieces so that they easily fit the
throat.
Plug the meat grinder in and set the switch to the ON
should be done by the manufacture or service
department or the other high-skill person to avoid any
danger.
Do not attempt to repair, adjust or replace parts in the
position.
Place the meat on the hopper tray and feed it into the
meat grinder little by little with the pusher.
After finishing work switch off the meat grinder and
appliance. Check and repair the malfunctioning
appliance in the nearest service center only.
Keep the cord away from sharp edges and hot surfaces.
Do not pull, twist, or wrap the power cord around the
appliance.
Do not place the appliance near gas or electric oven or
unplug it from outlet.
MAKING KEBBE
Kebbe is a traditional Middle Eastern dish. It is usually
store at heated surface.
Avoid contacting with moving parts.
The blades are very sharp, so handle them with care.
Do not push products into the appliance with fingers
while it is in operation. If food becomes lodged in the
feeder tube, use the pusher to push it down. If this
doesn’t work, turn the motor off, unplug the unit, and
then disassemble the appliance to remove remaining
food.
When carrying the unit be sure to hold the motor
prepared of lamb and bulgur minced together to smooth
paste. Paste is formed to hollow tubes, stuffed with
mixture of meat and spices and then deep-fried.
Feed
the
prepared
minced
meat
through
the
kebbemaker.
Cut the resulting tube into cylinders of desired length.
Stuff the cylinders with filling and seal the ends.
Deep-fry kebbe.
MAKING SAUSAGES
Put the sausage skin in warm water for 10 minutes.
Then slide the wet skin onto the sausage horn.
Put the minced meat in the tray. To fill the skin push the
housing with both hands. Do not carry the unit by the
hopper plate or head.
Do not fix the cutting blade and cutting plate when
meat into the cutter housing.
If the skin gets stuck onto the sausage horn, wet it with
using kebbe attachment.
Do not grind hard food such as bones, nuts, ginger or
other products with hard fiber.
When the circuit breaker activates, do not switch on.
some water.
IMPLEMENTS FOR GRATING AND CHOPPING
These implements are used for chopping vegetables
and fruit.
www.scarlett.ru
SC-MG45M07
5