Текст страницы
RECEIVING AND TRANSMITTING
To communicate, all radios in your group must be set to the same channel and sub code.
1. To talk, press and hold the PTT button. When transmitting, the icon is shown. Release the PTT
button when you are finished talking. Do not use the radios closer than five feet apart.
2. When receiving, the icon is shown.
Monitor Button
1. Press and hold button for 3 seconds to enter monitor mode and listen for weak signals on the
current channel.
2. You can also press button to check for activity on the current channel before you talk.
3. Release the button to exit monitor mode.
PTT Time out Timer
When you press PTT buttons for more than 60 seconds, radio will stop transmitting. This is to prevent
accidental transmission.
FEATURES
Setting the Channel
1. Press the button until the channel number starts to flash.
2. Press or button to change the channel number. Press the PTT button to exit menu.
Channels and Frequencies
CH
Frequency
(MHz)
Max
Power
Output
CH
Frequency
(MHz)
Max
Power
Output
CH
Frequency
(MHz)
Max
Power
Output
CH
Frequency
(MHz)
Max
Power
Output
0.5W
1
0.5W
5
446.05625
0.5W
446.00625
9
446.10625
0.5W
13
446.15625
0.5W
2
0.5W
6
446.06875
0.5W
446.01875
10
446.11875
0.5W
14
446.16875
0.5W
3
0.5W
7
446.08125
0.5W
446.03125
11
446.13125
0.5W
15
446.18125
0.5W
4
0.5W
8
446.09375
0.5W
446.04375
12
446.14375
0.5W
16
446.19375
Channels: 16 PMR (Note:only Channels 1 to 8 are available by default. Channels 9 to 16 need to be
activated by user before they can be selected. Channels 9 to 16 should only be used in countries where
these frequencies are allowed by government authorities. Channels 9 to 16 are not allowed in Russia)
12