Текст страницы
Setting the Sub Codes
1. Press the button until the code number starts to flash.
2. Press or button to select code number. Press the PTT button to exit menu.
Setting and Transmitting Call Tones
1. Press button until call tone 'CA' appears. The current call tone setting flash.
2. Press or button to change and listen to the call tone. Press the PTT button to exit menu.
Voice Operated Transmission (VOX)
1. To activate VOX, press button until 'VOX' appears on the display. The current setting (0, 1-3) will flash.
2. Press or button to select the sensitivity level. Press the PTT button to exit menu.
L3 = High Sensitivity
L2 = Medium Sensitivity
L1 = Low Sensitivity
L0 = Turn Off VOX function
Dual Channel Monitor
With this feature enabled, you can scan current channel and another channel alternately.
1. Press button until '2CH' appears on the display. The current setting (OF, 1-22) will flash.
2. Press or to select channels. Press the PTT button to exit menu. The screen will alternate
between Home Channel and Dual Watch Channel. To end Dual Watch mode, re-enter Dual Watch
menu to select the OFF setting. If you set the same channel and code as current channel, Dual
Watch does not work.
Keypad Tones
Press and hold the button while turning the radio ON to switch the keypad tone ON/OFF.
Roger Tone
Press and hold the button while turning the radio ON to turn the Roger Beep ON. Repeat the step
to turn Roger Beep OFF .
Keypad Lock
1. To lock the radio, press and hold button until the key lock indicator icon on display appear.
2. To unlock the radio, press and hold button until key lock indicator icon on display disappear.
3. Repeat the step to unlock the device.
13