Текст страницы
IM2024
6. PACKAGE CONTENTS
Air cooler
1
Cool-pack
2
Remote control
1
CR2025 battery
1
Operation manual
1
Warranty card
1
7. ASSEMBLING
1. Remove the device from the box. Before starting assembly, make sure that the package is complete and the
accessories are not damaged.
2. Do not connect the appliance to the mains without first fully assembling it.
3. Take both parts of the base from the kit and turn them upside down, align the docking frames at an angle with
their corresponding buckles on each part, then fasten by pressing (Fig. 1). Align the buckled halves with each other.
4. Take the appliance and turn it upside down, place the inverted base on top and align its slots with the locating
pins on the appliance (fig.2), turning the base on the appliance towards the closed lock icon (fig.3). When removing,
press the device buckle to release the base and rotate the base itself in the direction of the open lock icon, then
remove (Fig.4).
5. Turn the appliance over and place it with its base on the floor.
6. The cooler is ready for operation.
Buckets
Buckets
Locating pins
Figure 1
Figure 2
15
ENG