Текст страницы
EN
EN
5. USING THE PRODUCT
Point the remote control at
the infrared receiver..
Make sure that
the power cord is
unplugged.
Optional: To put
your product into
storage position,
disable the locks.
While your program
is running, the screen
will display the time
remaining for the
cycle.
1 Press the « on/off »
button on the remote
control.
Remove the
container and fill it
with water.
! Do not open the
shutter while the
program is running.
Pull the switch for
locking/unlocking
the shutter to lower
it.
BIP
Plug the appliance
in.
A beeping sound
will indicate that
theprogram has
finished.
1
Press on the
handles for
adjusting the height
of the posts while
applying pressure to
lower them.
2 Select one of the three
available programs. An
indicator at the bottom of
Care For You will light up
to confirm the selected
program.
2
Press the switch for
locking/unlocking the
shutter to lower it.
3
4
3 Use the « + » et « – »
buttons to adjust the
time displayed on the
bottom of Care For You.
Position up to three
garments and
any straighteners
required for
steaming. (See
« How do I position
my clothes ? »
section).
4 Start the selected
program by pressing the
« start/stop » button.
Lift the shutter.
Press the up/
down handles for
adjusting the height
of the posts and
adjust them until
you hear the locking
mechanism click
into place.
Close the shutter.
Remove the
garments(s) and any
straighteners used.
The strip along the bottom
of the product will light up
as it heats up.
Lift the lock.
! Always close the
shutter before you
start a cycle.
- 16 -
- 17 -