Текст страницы
fied personnel using original spare parts. Damaged
battery chargers, cables and plugs increase the risk of
electric shock.
•• Use the power tool, accessories and tool bits
etc., in accordance with these instructions, taking
into account the working conditions and the work
to be performed. Use of the power tool for operations
different from those intended could result in a hazard
ous situation.
•• Do not operate the battery charger on easily in
flammable surfaces (e.g. , paper , textiles , etc.) or
in combustible environments. There is danger of fire
due to the heating of the battery charger during charg
ing.
•• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Service
•• Note that when you operate a power tool, please
hold the auxiliary handle correctly, which is helpful
when controlling the power tool. Therefore, proper
holding can reduce the risk of accidents or injuries.
•• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power tool
is maintained.
Battery tool use and care
•• Follow instruction for lubricating and changing ac
cessories.
Special safety warnings
•• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
•• Wear ear protectors. Exposure to noise can cause
hearing loss.
•• Use power tools only with specifically designat
ed battery packs. Use of any other battery packs may
create a risk of injury and fire.
•• Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
•• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
•• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci
dentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
•• Avoid unintentional switching on. Ensure the
on / off switch is in the off position before inserting
battery pack. Carrying the power tool with your finger
on the on / off switch or inserting the battery pack into
power tools that have the switch in accidents.
•• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
Notice the supply power voltage: in power connec
tion, be sure to note whether the power supply volt
age is the same as that labeled on the tool nameplate.
When the power supple voltage is higher than the volt
age applicable to the tool, an accident will happens
to the user and meanwhile the tool itself will be de
stroyed. Therefore, in case of the failure to confirm the
power supply voltage, never plug in arbitrarily. On the
contrary, when the power supply voltage is lower than
that needed for the tool, the motor will be damaged.
•• Do not open the battery. Danger of circuit.
•• In case of damage and improper use of the bat
tery, vapors may be emitted. Provide for fresh air
and seek medical help in case of complaints. The
vapors can irritate the respiratory system.
Safety guidelines during power tool op
eration
•• When the battery is defective, liquid can escape
and come into contact with adjacent components.
Check any parts concerned. Clean such parts or re
place them, if required.
All instructions have to be read. In case of
using the machine not in accordance with
the following provisions, electric shock, fire
or serious injury may occur.
•• Protect the battery against heat, e.g., also
against continuous sun irradiation and fire. There
is danger of explosion.
•• Check that the drill bit has been clamped in proper
position or not prior to operation.
WARNING! Read all safety warnings and
all instructions.
•• Power tool working will generate vibration and you
should carefully confirm that screws in different places
still are tightened or not prior to operation.
•• Protect the battery charger from rain and mois
ture. The penetration of water in a battery charger in
creases the risk of electric shock.
•• Wear blinder in operation to protect eyes.
•• Maintain the keenness of the drill bit so as to achieve
the optimum and safest efficiency.
•• When replace or assemble the accessories, the op
eration must follow the instructions of the accessory
strictly.
•• Do not charge other batteries. The battery charger
is suitable only for charging lithium ion batteries within
the listed voltage range. Otherwise there is danger of
fire and explosion.
•• Keep the battery charger clean. Contamination
may cause the danger of electric shock.
•• If the productor has any problems, you must not try
to repair personally, please take it to the local assigned
maintenance center for inspection.
•• Fix the workpiece as far as possible. The workpiece
shall be fixed with fixing device or pincer pliers, which
shall be fastness than holding the piece in hand.
•• Check the battery charger, cable and plug each
time before using. Do not use the battery charger
when defects are detected. Do not open the battery
charger yourself and have it repaired only by quali
25
English