Текст страницы
English
HEAVY-DUTY ROTARY HAMMERDRILL D25614
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the
most reliable partners for professional power tool users.
Technical Data
EC-Declaration of Conformity
Machinery Directive
D25614
Voltage
VAC
230
(U.K. & Ireland only)
VAC
230/115
Type
1
No-load speed
min-1
190–380
No-load beats per minute
bpm
1450–2900
Power input
W
1350
Single impact energy (EPTA 05/2009)
J
10.5
Optimum drilling range into concrete
mm
16–32
Maximum drilling range in concrete
mm
45
Maximum core drilling range in concrete
mm
125
Tool holdler
SDS MAX
Weight
kg
7.8
Heavy-Duty Rotary Hammerdrill
D25614
DEWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DEWALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DEWALT.
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-6:
LPA (emission sound pressure level)
dB(A)
93
LWA (sound power level)
dB(A)
104
K
(uncertainty for the given sound level)
dB(A)
3
Markus Rompel
Vice-President Engineering, PTE-Europe
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
01.10.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Drilling
Vibration emission value ah, HD =
m/s²
8.9*
Uncertainty K =
m/s²
1.5
Chiselling
Vibration emission value ah,Cheq =
m/s²
9.0*
Uncertainty K =
m/s²
1.5
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
3