Текст страницы
English
HEAVY-DUTY CORDLESS SDS MAX COMBINATION HAMMER DCH735, DCH775
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power tool users.
Technical Data
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
mm
40–125
40–150
DCH735
DCH775
Voltage
VDC
54
54
Type
1
1
No-load speed
min-1
177–355
145–290
No-load beats per minute
bpm
1350–2705
1105–2210
Single impact energy (EPTA 05/2009)
J
13.3
19.4
Optimum drilling range into concrete
mm
25–38
28–42
Maximum drilling range in concrete
mm
48
52
Maximum core drilling range in
concrete
Bit holder
SDS max®
SDS max®
Chisel positions
24
24
Weight (without battery pack)
kg
8.5
9.4
Noise values and vibration values (triax vector sum) according to EN62841-2-6:
Heavy-Duty Cordless SDS max® Combination
Hammer
DCH735, DCH775
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
These products also comply with Directive 2014/53/EU and
2011/65/EU.For more information, please contact DeWALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
dB(A)
3
3
LPA (emission sound pressure level)
dB(A)
97
96
LWA (sound power level)
dB(A)
108
107
K
(uncertainty for the given sound
level)
Drilling
Vibration emission value ah, HD =
m/s²
9.0*
10.1*
Uncertainty K =
m/s²
1.5
1.5
Chiselling
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
26.02.2021
Vibration emission value ah,Cheq =
m/s²
8.8*
9.4*
Uncertainty K =
m/s²
1.5
1.5
*Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
3