Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DHR183
Drilling capacities
Concrete
18 mm
Steel
13 mm
Wood
24 mm
No load speed
0 - 1,100 min
-1
Blows per minute
0 - 5,000 min
-1
Overall length (with BL1860B)
288 mm
Rated voltage
D.C. 18 V
Net weight
2.1 - 2.9 kg
Optional accessory
Model:
DX16
Suction performance
0.24 l/min
Operating stroke
Up to 105 mm
Suitable drill bit
Up to 165 mm
Net weight
0.77 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
PDC01
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
Intended use
Model DHR183 with DX16
Sound pressure level (LpA) : 90 dB(A)
Sound power level (LWA) : 101 dB (A)
Uncertainty (K) : 3 dB(A)
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
Noise
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
The typical A-weighted noise level determined accord-
ing to EN62841-2-6:
Model DHR183
Sound pressure level (LpA) : 90 dB (A)
Sound power level (LWA) : 101 dB (A)
Uncertainty (K) : 3 dB (A)
8
ENGLISH