Текст страницы
ENGLISH (Original instructions)
Explanation of general view
26
Chuck cover
27
O symbol
28
Action mode changing knob
29
Depth gauge
30
Dust cup
31
Blow-out bulb
32
Chuck adapter
33
Drill chuck
34
Sleeve
35
Ring
36
Limit mark
37
Brush holdre cap
38
Screwdriver
1
Red indicator
2
Button
3
Battery cartridge
4
Star marking
5
Battery indicator
6
Switch trigger
7
Lamp
8
Reversing switch lever
9
Quick change chuck for SDS-
plus
10
Change cover line
11
Change cover
12
Spindle
13
Quick change drill chuck
14
Rotation with hammering
15
Rotation only
16
Hammering only
17
Grip base
18
Teeth
19
Loosen
20
Tighten
21
Side grip
22
Protrusion
23
Bit shank
24
Bit grease
25
Bit
SPECIFICATIONS
Model
DHR263
DHR264
Concrete
26 mm
Capacities
Steel
13 mm
Wood
32 mm
No load speed (min–1)
0 – 1,250
Blows per minute
0 – 5,000
Overall length
350 mm
374 mm
Net weight
4.6 kg
4.7 kg
Rated voltage
D.C. 36 V
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
ENE043-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
GEB046-2
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tools by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
4.
Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly
recommended that you wear a dust mask and
thickly padded gloves.
5.
Be sure the bit is secured in place before
operation.
6.
Under normal operation, the tool is designed to
produce vibration. The screws can come loose
easily, causing a breakdown or accident. Check
tightness of screws carefully before operation.
7.
In cold weather or when the tool has not been
used for a long time, let the tool warm up for a
while by operating it under no load. This will
loosen up the lubrication. Without proper warm-
up, hammering operation is difficult.
8.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
9.
Hold the tool firmly with both hands.
10. Keep hands away from moving parts.
11. Do not leave the tool running. Operate the tool
only when hand-held.
CORDLESS ROTARY HAMMER SAFETY
WARNINGS
1.
Wear ear protectors. Exposure to noise can cause
hearing loss.
6