Текст страницы
Vibration
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model DHR280
Work mode: hammer drilling into concrete
Vibration emission (ah, HD): 9.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: hammer drilling into concrete with DX03
Vibration emission (ah, HD): 8.0 m/s
2
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Uncertainty (K) : 1.5 m/s
2
Work mode: chiselling function with side grip
Vibration emission (ah, Cheq): 8.5 m/s
2
EC Declaration of Conformity
Uncertainty (K) : 1.5 m/s
2
For European countries only
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
The EC declaration of conformity is included as Annex A
to this instruction manual.
Model DHR281
Work mode: hammer drilling into concrete
Vibration emission (ah, HD): 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
SAFETY WARNINGS
Work mode: hammer drilling into concrete with DX04
Vibration emission (ah, HD): 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
General power tool safety warnings
Work mode: chiselling function with side grip
Vibration emission (ah, Cheq): 9.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Model DHR282
Work mode: hammer drilling into concrete
Vibration emission (ah, HD): 9.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: hammer drilling into concrete with DX03
Vibration emission (ah, HD): 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work mode: chiselling function with side grip
Vibration emission (ah, Cheq): 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
CORDLESS ROTARY HAMMER
SAFETY WARNINGS
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DHR283
Work mode: hammer drilling into concrete
Vibration emission (ah, HD): 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: hammer drilling into concrete with DX04
Vibration emission (ah, HD): 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: chiselling function with side grip
Vibration emission (ah, Cheq): 8.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
1.
Wear ear protectors. Exposure to noise can
cause hearing loss.
2.
Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
4.
Wear a hard hat (safety helmet), safety glasses
and/or face shield. Ordinary eye or sun glasses
are NOT safety glasses. It is also highly recom-
mended that you wear a dust mask and thickly
padded gloves.
5.
Be sure the bit is secured in place before
operation.
6.
Under normal operation, the tool is designed
to produce vibration. The screws can come
loose easily, causing a breakdown or accident.
Check tightness of screws carefully before
operation.
11
ENGLISH