Текст страницы
ENGLISH
en
Drilling
Hammer drilling
7.4
Selecting the direction of rotation
Do not activate the direction switch (6) unless
the motor has completely stopped.
Select direction of rotation:
R =
clockwise rotation (for drilling, hammer
drilling, drive in screws)
L
=
anti-clockwise rotation (for the removal of
screws)
0
=
Centre position: with the transporting safety
device engaged (switch-on lock)
Use only accessories that fulfil the requirements
and specifications listed in these operating instruc-
tions.
Fit accessories securely. If the machine is operated
in a holder: secure the machine well. Loss of control
can cause personal injury.
Batter chargers: ASC 55, ASC 30-36, etc.
Battery packs with different capacities. Only
use battery packs with voltage suitable for your
power tool.
Order no.:
625406000 ............... 12 V 2.0 Ah (LiPower)
625349000 ............... 12 V 4.0 Ah (LiHD)
etc.
625596000 ............... 18 V 2.0 Ah (LiPower)
625367000 ............... 18 V 4.0 Ah (LiHD)
etc.
For a complete range of accessories, see
www.metabo.com or the catalogue.
11. Repairs
Repairs to electrical tools must be carried out
by qualified electricians ONLY!
7.5
Tool change with SDS chuck
Before fitting, clean tool shank and apply
special grease (accessories order no.
6.31800)! Use only SDS-Plus tools.
Inserting tools:
- Turn tool and insert until it engages. The tool is
locked automatically.
If you have Metabo electrical tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
Removing the tool:
See page 2, fig. A.
- Pull tool lock (1) backwards in direction indicated
by arrow (a) and remove tool (b).
You can download spare parts lists from
www.metabo.com.
12. Environmental Protection
7.6
Metabo VibraTech (MVT)
For reduced vibrations and less stress on the
hands.
Always apply a moderate amount of pressure to the
handle when pushing down the machine and do not
force. Vibrations are reduced most effectively at the
central position (5).
8.
Maintenance, cleaning
- Ventilation slits:
Clean the ventilation slits on the machine occa-
sionally.
- Remove the battery pack periodically and wipe
the contact area of the battery pack and machine
with a dry cloth and remove drilling dust.
f
9.
Troubleshooting
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Packaging materials must be disposed of according
to their labelling in accordance with municipal
guidelines. Further information can be found at
www.metabo.com in the “Service” section.
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2012/
19/EU on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately and
handed in for environmentally compatible recycling.
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-circu-
iting (e. g. by protecting them with adhesive tape).
f
Metabo S-automatic safety stop: The LED light
(11) lights up and the machine SWITCHES OFF
automatically. If the speed is too high (if the
machine seizes suddenly), the machine switches
off. Switch off the machine at the trigger switch (7).
Switch it on again and continue to work as normal.
Try to prevent the machine from seizing.
f
13. Technical Specifications
10. Accessories
Use only original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
Explanation of details on page 3. Subject to
changes serving technical progress.
U
=
Voltage of battery pack
n0
=
No-load speed
10