Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DLW140
Wheel diameter
355 mm
Hole diameter
25.4 mm
Max. wheel thickness
3 mm
No load speed
3,800 min
-1
Rated voltage
D.C. 36 V
Dimensions
(L x W x H)
With European type safety guard
537 mm x 290 mm x 640 mm
With safety guard other than
European type
537 mm x 280 mm x 640 mm
With center cap type safety guard
537 mm x 280 mm x 640 mm
Net weight
With European type safety guard
17.2 - 17.8 kg
With safety guard other than
European type
15.6 - 16.3 kg
With center cap type safety guard
15.4 - 16.0 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
•
The shape and weight vary depending on the specifications which differ country to country.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
The tool is intended for cutting in ferrous materials with
appropriate abrasive cut-off wheel. Follow all laws and
regulations regarding dust and work area health and
safety in your country.
Noise
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
The typical A-weighted noise level determined accord-
ing to EN62841-3-10:
Sound pressure level (LpA) : 103 dB(A)
Sound power level (LWA) : 115 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Vibration
EC Declaration of Conformity
For European countries only
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-3-10:
Vibration emission (ah) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
The EC declaration of conformity is included as Annex A
to this instruction manual.
6
ENGLISH