Текст страницы
Cordless Planer
groove of the required width will be selected
to the installation depth of the regulator 2.
Then, with the required number of successive
passes, bring the depth of the groove to the
desired one.
Maintenance and Service
Maintenance and Cleaning
►Before any work on the machine itself,
pull the mains plug.
►For safe and proper working, always
keep the machine and ventilation slots
clean.
►Регулярно проверяйте надежность
крепления и состояние ножей. При
затуплении ножей замените их на
новые.
Note! To avoid increased vibration of the
drum due to imbalance, the knives should be
changed in pairs.
Service
►Have your power tool repaired only by
qualified personnel and only with original
replacement parts. This ensures the safety
of the power tool.
The list of authorized service centers can be
viewed on the official website of P.I.T. by the
link: https://pittools.ru/servises/
Storage and transportation
The welding machine should be stored in
closed rooms with natural ventilation at
temperatures from 0 to +40 ° C and relative
humidity up to 80%. The presence of acid va
pors, alkalis and other aggressive impurities
in the air is not allowed.
Products can be transported by any type of
closed transport in the manufacturer’s pack
aging or without it, while preserving the prod
uct from mechanical damage, precipitation.
Remove the battery and accessories from the
power tool before transporting.
Dispose of waste
Damaged power tools, batteries, acces
sories and waste packaging materials
must be recycled and reused in an envi
ronmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta
tion serial number
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu
ment that confirms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certificates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
warranty:
1. In the absence of any valid legal docu
ments (invoices) such as warranty certificates
and warranty cards to prove the date of pur
chase.
2. Damage caused by natural wear and over
load. (For example, motor rotor and stator fail
ure caused by overload, scorching or melting
of the primary winding of the welding machine
transformer, charging or starting the charging
device, melting of internal parts, burning of
electronic circuit boards, etc.)
3. The casing and power cord are mechani
cally damaged, as well as damage caused by
corrosive media and high and low tempera
ture, foreign objects entering the ventilation
network of the motor, and damage caused by
8