Текст страницы
INSTRUCTION MANUAL
HOT PLATE PARTS IDENTIFICATION
A
- heating plate
B - housing
C - operation indicator
D - switch/temperature control
E - power supply cord
TECHNICAL SPECIFICATIONS
Voltage:
230 V~ 50 Hz
Rated power:
1500 W
Heating plate diameter: 185 mm
Maximum load:
10 kg
Product dimensions:
25.0 x 25.0 x 6.5 cm
Service life:
3 years
With delicate handling service life can significantly exceed the period set by the
manufacturer.
Date of production is represented on the label of the product in the format MM.YYYY
OPERATING THE HOT PLATE
1. Place the hot plate onto a steady even surface, 10 cm from the wall. Unwind
the cord completely.
2. Plug the appliance.
3. Put the dish with the products onto the hot plate. Try to place the dish exact
onto the heating plate.
4. Turn the switch / controller by setting the desired temperature. The operation
indicator lights and the heating element will heat up.
5. The thermostat will disable the heater upon reaching the set temperature.
Heater will be reconnected by thermostat as soon as the temperature drops for 20° C.
Thereby it keep the desired temperature automatically.
6. When you have finished please turn the switch counter-clockwise until it clicks
to turn it off. The operation indicator will go out then. Unplug it If you're not going to
use hot plate in the near future.
5