Текст страницы
Instruction manual
Important safeguards
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• Do not disassemble the unit yourselves.
Refer servicing to qualified service
personnel.
All the illustrations in this manual are
schematic images, which may differ from
actual objects.
Power supply
• Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
• Switch on the unit and press the
M button repeatedly to select the
Bluetooth mode (selected by default).
• Once the Bluetooth pairing indicator
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as SM-PS5027B).
• If asked for a passcode, enter “0000”.
• The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
• The LED indicator will flash when
searching for a Bluetooth device and stay
on when the devices are paired.
• When playing files, you can press
button to pause and resume
the
playback.
• Press the or button to go to a
previous or next track. Press and hold
these buttons to decrease or increase
volume, respectively.
External device connection
• The unit operates on an internal
rechargeable Li-ion battery and 220V mains
via adapter (not included).
• The battery can be recharged with the
provided USB charging cable. Before first
plugging the appliance check that voltage
indicated on the rating label corresponds
to the mains voltage in your home.
• Insert the charging cable into the
DC 5V socket at the top panel of the unit.
• Connect the charging cable to the power
source. The unit is charging when the red
LED indicator is on.
• You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speaker.
• To connect an external audio device,
please use a micro USB-3.5mm mini jack
audio cable to connect the external device
to the AUX input of this unit.
• For best results, try to fully charge the
battery before each use. If the battery is
drained, please allow it to recharge for a few
hours.
- Press M button to select the AUX mode.
- Turn on the external device.
• Put the OFF/ON switch into ON
position to switch the unit on. Put it into OFF
position to switch off.
TWS function
General operation
Bluetooth wireless playback
• This unit can wirelessly playback audio
from any device with Bluetooth A2DP
function.
• The wireless range is approximately within
10 meters in direct line of sight.
• If you have two units at your
disposal, you can pair them to each other and
enable the True Wireless (TWS) stereo
sound.
• Turn the both units on and
switch them into the Bluetooth mode. Press and
hold M on any of the units. A beep will sound,
indicating that the unit is ready for TWS pairing.
Keep holding M for 5-10 seconds, you will hear
another beep sound when the units are paired
successfully.
• Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
3