Текст страницы
5. ADJUSTING
5.1
ADJUSTING THE IMAGE HEIGHT AND TILT
The projector’s height and tilt can be adjusted with the tilt adjustment feet and ring.
Locate the adjustable foot you wish to adjust on the underside of the projector.
Rotate the foot clockwise or counterclockwise to raise or lower the projector.
5.2
ADJUSTING THE ZOOM, LENS SHIFT AND FOCUS
To adjust the image size, turn the zoom ring clockwise or counterclockwise to increase or decrease the projected
image size.
To adjust the image position, turn the lens shift dial clockwise or counterclockwise to adjust the position of the
projected image vertically. (Not available on all models.)
To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and legible.
5.3
ADJUSTING THE VERTICAL AND HORIZONTAL KEYSTONE
If one side of the image is shorter than the other, for example the top is shorter than the bottom, you can either
reposition the projector or use keystone correction.
To adjust the top or bottom of the picture (the pitch), angle the projector lower or higher. If that is not possible,
adjust the vertical keystone:
Press the Menu button on the projector keypad or the Menu button on the remote control to open the OSD menu.
Select Image › V Keystone
Adjust the settings by using the arrow keys keys
Press the Return symbol or Enter button to select a setting.
Press the Menu symbol or Menu button to close the OSD menu. The menu will close and the projector will
automatically save the new settings.
infocus.com | [page 27]