Текст страницы
ENGLISH (Original instructions)
Explanation of general view
1-1. Slide switch
2-1. Wrench 13
2-2. Collet nut
2-3. Wrench 13
5-1. Side handle
SPECIFICATIONS
Model
GD0602
Max. collet capacity
8 mm
Max. wheel point diameter
38 mm
Rated speed (n) / No load speed (n0)
25,000 min-1
Overall length
264 mm
Net weight
1.4 kg
Safety class
/II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
• Weight according to EPTA-Procedure 01/2003
ENE050-1
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The
typical
A-weighted
noise
level
determined
according to EN60745:
Sound pressure level (LpA) : 75 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The
vibration
total
value
(tri-axial
vector
sum)
determined according to EN60745:
Work mode : surface grinding
Vibration emission (ah,SG) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG902-1
•
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
EC Declaration of Conformity
We
Makita
Corporation
as
the
responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Die Grinder
Model No./ Type: GD0602
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
•
The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
3