Текст страницы
8
EN
USING THE ATTACHMENTS
Attaching the telescopic pipe (4) and the attachments
Floor/carpet brush (1)
When using the brush (1) set the switch (2) to the
necessary «FLOOR/CARPET» position.
Parquet flooring attachment (27)
• Use the attachment (27) for cleaning smooth polished
parquet or laminate flooring.
Crevice nozzle (28)
• Attach the telescopic extension pipe (4) to the flexible
hose handle (5).
• Extend the lower part of the telescopic extension pipe (4)
to the required length, having preliminarily pressed the
lock (3) (pic. 2).
• Choose the necessary attachment – floor/carpet brush
(1), parquet brush (27), narrow brush (28) or combined
crevice nozzle (29) and attach it to the telescopic
extension pipe (4).
• The crevice tool (28) and the furniture / upholstery brush
(29) can be attached to the handle of the flexible hose (5).
• Use the crevice nozzle (28) for cleaning radiators,
crevices, spaces between couch cushions and such.
ATTENTION!
Upholstery / Upholstery Brush (29)
The attachment (29) is intended for cleaning fabric
surfaces of upholstered furniture, and for collecting dust
from the surface of furniture, while the presence of lint on
the brush (29) prevents damage to the polished furniture
surface. Place the brush on the attachment (29) during
operation.
ASSEMBLING THE VACUUM CLEANER
Attaching and removing the flexible hose (7)
• Insert the flexible hose (7) ending (8) into the air inlet
(10) until the locks (9) catch.
• To remove the flexible hose (7), press the locks (9) and
detach the ending (8) from the air inlet (10).
• Do not use the vacuum cleaner in places where aerosols
are used or sprayed and in proximity to highly inflammable
liquids, do not use the vacuum cleaner in the places
where such liquids are stored.
• The vacuum cleaner is not intended for collecting water
or any other liquids; do not use it for collecting burning or
smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of
plaster, concrete, flour or ashes.
• Take sharp objects away from the floor before cleaning to
prevent damage to the unit.
• If the suction power of the vacuum cleaner decreases
rapidly while cleaning, switch it off immediately, unplug it
and check the telescopic pipe (4) or the flexible hose (7)
for obstruction. Remove the obstruction, after that you can
resume cleaning.