Инструкция пылесос Roborock Dyad Pro

Routine Maintenance

3. Allow up to 24 hours for all parts drying and install them back

4. Pinch the left and right front rollers with both hands, and pull

in place.

them outward.

5. Cut off any hair entangled on the rollers and remove any debris

using the provided maintenance brush.

Notes:

• Use a second filter if necessary.
• Do not touch the filter with your hands, brushes, or sharp objects to avoid damage to the filter.

Cleaning the Rollers

Note: Use the maintenance brush carefully to avoid injury.

1. Remove the vacuum cleaner from the charging dock, switch it off.
2. Place the vacuum on a hard and flat floor and lock the cleaning

6. Insert the rear roller from the side, and then rotate the rear

head.
3. Rotate the rear roller cover to the unlock position, and pull the

rear roller outward.

roller cover from the unlock position to the lock position until it
clicks in place.

Click
Click

18