Текст страницы
EN OPERATION
Assembling Attachments
Getting Started
Nozzles and tools can be attached to either the
product body or the end of the extension pipe.
Before Using the Appliance
1 Insert the fully charged battery a into the
cavity at the bottom of the handle on the
product body.
•• Close the dust bin cover properly before using
the appliance. If the dust bin cover is left open,
the suction strength may deteriorate and affect
the cleaning performance.
•• Support the bottom of the appliance when
cleaning an elevated surface.
•• Store the appliance in the charging station
or place it flat on the floor when not in use.
Leaning the appliance against a wall or chair
can result in product damage or personal injury
if the appliance falls.
•• Make sure that the exhaust filter or pre-filter is
properly assembled before using the appliance.
2 Attach the nozzles, tools, or extension pipe
by sliding them onto the inlet b on the body
until they click into place. The nozzles and
tools can also be attached to the end of the
extension pipe b.
•• Environmental conditions such as temperature
and humidity may cause static electricity to
accumulate on the appliance. Please contact
LG Electronics customer information center if
the problem persists.
•• Detach the accessories by pressing the
release button c.
•• Make sure to remove any foreign object
such as a sock or stocking before using the
appliance. Any foreign object on the inlet port
or extension pipe will prevent the appliance
from functioning properly.
•• Please use the product at normal room
temperatures as the battery runtime may
deteriorate severely if used at temperatures
lower than 5 °C or higher than 38 °C for an
extended period of time.
•• The battery runtime is dependent on the
surface type and the suction power.
3 Adjust the extension pipe by pressing the
length adjustment button d on the back of the
pipe and sliding until it clicks into place at the
desired length.
•• Follow manufacturer’s recommendations when
cleaning flooring, carpets, and rugs.
•• The extension pipe extends in four steps.
•• To avoid scratches on polished floors, keep the
brushes of the nozzles and tools free from grit,
sand, or abrasive objects.
•• Refer to the Parts and Specifications section
for battery runtime details.
22