Текст страницы
EN
Using the Mop Nozzle
EN
This feature is only available on some models.
2 Remove the battery in the charging station by
pressing the button at the rear of the battery
and lifting the battery.
Before Using the Mop Nozzle
•• The mop pads only rotate at one speed
regardless of what suction power setting the
product body is set to.
•• Do not use a soiled mop pad to clean floors.
3 Insert the fully charged battery into the cavity
at the bottom of the handle on the product
body.
•• To prevent product damage, the mop
attachment plate will automatically stop if
there are foreign objects stuck in the plate or
if it is subjected to a strong impact. Turn the
appliance off immediately and remove the
foreign objects or obstructions before resuming
use.
•• The battery will only fit into the cavity if
aligned properly.
•• If you hear a noise while mopping, the mop
pad may have dropped off the mop attachment
plate. Turn off the product immediately and
reattach the mop to the attachment plate before
resuming use.
•• Use only authorized LG Electronics mop pads.
•• Empty the dust bin and clean the exhaust filter
and the pre-filter after using the mop nozzle.
Using the Mop Nozzle
4 Insert the discharged battery into the auxiliary
charging station.
When you attach the mop nozzle, the product will
operate initially in only mop mode with suction
OFF.
•• The battery will only fit into the cavity if
aligned properly.
•• Press the “+” button if you wish to carry out
both dust cleaning and mop cleaning at the
same time in only mop mode.
•• The auxiliary charging indicator c flashes
while recharging is in progress.
•• Press the “-” button in normal mode if you wish
to use the only mop mode.
•• When charging is complete, the auxiliary
charging indicator c stays lit.
25