Текст страницы
English
FM/AM/SW1/SW2 4 BAND
RECEIVER
1.
Telescopic antenna
2.
Handle
3.
Band selector (back)
4.
Tuner
5.
Frequency indicating window
6.
Power switch/Volume control
7.
Earphone socket
8.
Battery slot (back)
9.
AC power socket
by using the internal magnetic
antenna, you can get the best
reception by rotating the direction
of the radio.
8.
In order not to affect others,
please insert the earphones
in the Earphone socket (7)
(the speaker inside the radio
disconnects automatically),
you can listen to the radio by
earphones.
9.
When the reception is bad, please
install new batteries.
10. Move the Power switch/Volume
control up to turn off the radio
when you are unwilling to listen to
the radio.
Specifications
1.
Frequency Range:
AM: 526.5-1606.5 KHz
FM: 64-108 MHz
SW1: 5.85-12.05 MHz
SW2:13.60-15.85 MHz
2.
Sensitivity:
MW: 68 dBµ
FM: 20 dBµ
SW: 3 6 dBµ
3.
AM S/N: > 42 dB
4.
Speaker: Ø 90mm/8Ohm/1W
5. Power: DC 3 V,
Battery two UM1 1.5V batteries
AC Power 220V 50Hz
5.
Maximum consume current:
< 200 mA
6.
Output power: ≥ 100 mW
7.
Size: 210 х 116 х 68 mm
8.
Weight: 555 g
Operation Instructions
1.
Open the battery cover, Put two
1.5V batteries into the Battery
Slot (8) with correct polarity.
2.
Put the power cord plug in
the AC socket to connect AC
power, the battery supply will be
automatically disconnected when
power cord is plugged in the AC
socket.
3.
Turn the Power Switch/Volume
Control (6) down to turn on the
radio, and adjust your desired
volume
4.
Move the Band selector (3) to
receive FM, AM, SW1, SW2 band
programs.
5.
After the band is selected, turn
the Tuner (4) and watch the
Frequency indicating window
(5) and dial pointer, select your
desired station program.
6.
When receiving FM or SW
stations, please pull the
telescopic antenna (1) out and
keep it vertical, to get better
reception.
7.
When receiving AM broadcast
3587IM.indd 3
09.03.2007 17:13:27