Текст страницы
❽3.5 mm TRS Input
For connecting an external lavalier
microphone.
❾USB-C Charging port / Data Export
shut down after 10 minutes.
• When multiple functions are activated on the
transmitter, its indicator will give priority to
displaying only one feature. The indicator is
prioritized as follows:charging > low battery
> unpaired >noise cancellation.
❸Recording Indicator
Status
Indicator
For charging the transmitter via the included
USB-C to USB-C data cable. The user can
read and download onboard recording
files from the in-built storage card of the
transmitter through this port.
Mute on
Blinks red
❿Magnetic Clip
For attaching the transmitter to clothing, or
using with the included magnet.
Onboard recording
enabled
Solid red
Failed to enable
onboard recording
Blinks red 3 times and
then turns off
Receiver (RX)
1
3
2
• When reading the onboard recording files,
onboard recording can not be enabled.
• The indicator is prioritized as follows: mute >
onboard recording.
4
6
9
8
TIP: The recording indicator doubles
as a charging status indicator when the
transmitter is placed into the charging case
for charging. See the chart below for more
details.
10
Status
Indicator
5
7
Charging
Solid red
Fully charged
Off
❶Touchscreen
❹REC Button
Press once to enable or disable onboard
recording.
❺NC Button
Displays vital information such as wireless
signal strength, noise cancellation, battery
levels and charging status of the transmitters
and receiver, gain, real-time volume,
output mode, timecode. Refer to Receiver
Touchscreen Operation for details.
Press once to activate or deactivate noise
cancellation
❷Knob
❻Charging Contacts
When the receiver touchscreen is on the
Settings Menu, rotate to select relevant
settings, then press once to access sub
menus.
Charging will begin when the charging
contacts of the transmitter connect to the
charging pins of the charging case.
❼In-built Microphone
04