Текст страницы
❸Tap the
❹ Go to More Settings > Sound Modes,select
icon in the upper left corner, then
tap “Saramonic Ultra Device Management”
to enter the receiver (RX) and transmitter (TX)
control page.
Low Gain Mode. In this mode, the maximum
sound pressure level can reach 130 dB,
effortlessly preventing sound spikes and
distortion, while significantly improving
recording quality.
Control RX：
Using with a Camera
Use the included 3.5 mm TRS to TRS audio
cable to connect the receiver's 3.5 mm multi-
functional output to a camera, mixer.The audio
captured by the transmitter will be transferred
to the camera or mixer.
Swipe up on the screen to access TX1 and TX2
control：
Receiver Touchscreen Operation
Home Screen Overview
The home screen displays wireless signal
strength, noise cancellation, battery levels and
charging status of the transmitters and receiver,
real-time volume, output mode, auto gain,
timecode. The following is an example of the
touchscreen when the receiver is paired with
two transmitters.
08