Текст страницы
● Never place the device in an unstable location. The device may fall, causing serious personal injury
or death.
● If the device uses a 3-prong power supply plug, it must be connected to an earthed mains
socket-outlet properly.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
● The device shall not be exposed to water dripping or splashing, and no objects filled with liquids,
such as vases, shall be placed on the device.
● No naked flame sources should be placed on the device, such as lighted candles.
● For the device with ventilation openings, the ventilation openings should not be impeded by
covering the ventilation openings with items, such as newspapers, table-cloths, and curtains. The
openings shall never be blocked by placing the device on a bed, sofa, rug, or other similar surface.
● The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or
Wi-Fi dongle only. The current for the connected device shall be not more than 0.1 A.
● Under high working temperature (40 °C (104 °F) to 55 °C (131 °F)), the power of some power
adaptors may decrease.
● If the device needs to be installed on the wall or ceiling,
1. Install the device according to the instructions in this manual.
2. To prevent injury, this device must be securely attached to the installation surface in accordance
with the installation instructions.
● The device should be placed in a dry environment without corrosive gas (refer to the user manual
for details about corrosive gas).
● If a power adapter is provided in the device package, use the provided adapter only.
● If the device needs to be wired by yourself, select the corresponding wire to supply power
according to the electric parameters labeled on the device. Strip off wire with a standard wire
stripper at corresponding position. To avoid serious consequences, the length of stripped wire
shall be appropriate, and conductors shall not be exposed.
● Make sure that the power has been disconnected before you wire, install, or disassemble the
device.
● If your device is installed by spring loaded self-clinching screws, in order to prevent the chassis
cover from being removed by non-professional individuals, the tightening torque of chassis cover
screws should be 0.45 N.m.
● Make sure to use the proper torque when installing the HDD mounting screws to avoid affecting
the HDD's performance due to incorrect torque. The recommended torque range is 0.5-0.6N·m for
3.5-inch HDDs, and 0.4-0.5N·m for SSDs and 2.5-inch HDDs.
HDD or SSD Installation of Each Chassis Type
Type 1
Type 2
4