Текст страницы
EN
EN
Safety Information
Safety Information
· To prevent damage or harm from dragging, clear any loose objects from
· Do not use any third-party battery or base station with auto-empty. Use
Usage Restrictions
Batteries and
Charging
only with RCDD0202 supply unit.
· Do not attempt to disassemble, repair, or modify the battery or the base
the floor, and remove cables or power cords on the cleaning path before
operating the appliance.
· Remove fragile or small items from the floor to prevent the robot from
bumping into and damaging them.
· Keep hair, fingers, and other body parts away from the suction opening of
station with auto-empty on your own.
· Do not place the base station with auto-empty near a heat source.
· Do not use a wet cloth or wet hands to wipe or clean the charging contacts
of the base station with auto-empty.
· Do not improperly dispose of old batteries. Unneeded batteries should be
the robot.
· Do not operate the appliance in a room where an infant or child is sleeping.
· Do not place children, pets, or any item on top of the robot regardless of
discarded at an appropriate recycling facility.
· If the power cord becomes damaged or broken, stop using it immediately
whether it is stationary or moving.
· Do not use the robot to clean any burning objects. Do not use the robot to
and contact after-sales service.
· Make sure the robot is turned off when being transported and kept in its
pick up flammable or combustible liquids, corrosive gases, or undiluted
acids or solvents.
· Do not vacuum hard or sharp objects. Do not use the appliance to pick up
original packaging if possible.
· If the robot will not be used for an extended period, fully charge it, then
turn it off and store it in a cool, dry place. Recharge the robot at least once
every 3 months to avoid over-discharging the battery.
objects such as stones, large pieces of paper or any item that may clog the
appliance.
· Plug must be removed from the socket-outlet before cleaning or
· The laser sensor in this product meets the IEC 60825-1:2014/EN 60825-
Laser Safety
Information
maintaining the appliance.
· Do not wipe the robot or the base station with a wet cloth or rinse them
1:2014/A11:2021 Standard for Class 1 laser products. Please avoid direct
eye contact with it during use.
with any liquid. After cleaning washable parts, fully dry the parts before
reinstalling and using them.
· Please use this product in accordance with the instructions in the User
CLASS 1 LASER PRODUCT
CONSUMER LASER PRODUCT
EN 50689:2021
Manual. Users are responsible for any loss or damage that arise from
improper use of this product.
2
3