Текст страницы
NO.
Issues
Possible Causes
Solutions
Auto-Empty Station cover is open.
Close the Auto-Empty Station cover.
Dust Bag is uninstalled.
Install dust bag and close the Auto-Empty Station cover.
Let the Robot returns to Auto-Empty Station automatically,
don't move it manually.
Robot is manually moved to Auto-Empty
Station and Auto-Empty is not triggered.
Cancel the "Do Not Disturb" mode in ECOVACS HOME App,
or start the dust collection manually.
10
If "Do Not Disturb" mode is activated in
ECOVACS HOME App, Auto-Empty Station
does not collect dust automatically when the
Robot returns.
The Auto-Empty Station can't
collect dust when Robot
returns.
Auto-Empty Station detects that the dust
collection efficiency is low.
Replace the dust bag according to "Maintenance" in user
manual, and close the Auto-Empty Station cover. If App
reminds that the dust bag is not full, reinstall it.
Please contact after-sales service.
If the above possible reasons have been
ruled out, there may be an abnormality in
the components of the Auto-Empty Station.
Auto-Empty Station detects that the dust
collection efficiency is low.
Replace the dust bag according to "Maintenance" in
user manual, and close Auto-Empty Station cover. If App
remind that the dust bag not full, reinstall it.
11
Dust Collection failed.
The outlet of dust box is blocked.
Take out the 2 in 1 Module, and clean the dust box outlet.
Clean the inner side of the Auto-Empty Station.
Fine particles penetrates the dust bag
and sticks on the inner side of the
Auto-Empty Station.
12
The inner side of Auto-Empty
Station is dirty.
The dust bag is broken.
Replace the dust bag.
EN∣28