Текст страницы
4. Using Robot
4-3. Cleaning Option
Option
Display Window
Setting Method
Explanation
Used in carpet or covered environments (climbs up to 15mm).
ㆍClimb mode is automatically released when the mop plate is
mounted.
ㆍIf you cancel the Climb mode during carpet or mat cleaning, the
Press the CLIMB
( ) button on
the remote control
Climb
robot may not come down from the carpet or mat.
to set and cancel
accordingly.
It is recommended to not operate in Climb mode for carpets with
long or special material fibers. This may damage the carpet or cause
additional problems.
Mount the mop plate
Mop
at the bottom of the
robot.
It is possible to mop and vacuum at the same time by attaching the
mop plate.
▶ Refer to P15 <Mop Cleaning>
Press the VOICE( )
button on the
remote control to set
Voice
Guidance
It informs the robot status or error situation by voice.
ㆍIt is set as default.
and cancel.
4-4. Suction Power Settings and Smart Turbo
ㆍThe suction power can be adjusted within 3 levels. Level 2 is the default setting.
Press the VACUUM button on
the remote control to adjust
the suction power.
Remote Control
Option
Display Window
Setting Method
Explanation
Press the VACUUM
( ) button on
The robot recognizes the dusty area and automatically
raises the suction power to Level 3.
ㆍWhen the carpet or cleaning of the dusty area is completed, the
Smart
Turbo
(Default
Setting)
the remote
control for more
than 3 seconds to
set and cancel the
suction power returns to the default position.
ㆍIf you want to use the Level 1 suction power without the Smart
Turbo function, you can turn off the Smart Turbo.
Turbo mode.
13