Текст страницы
C6-2—
C10 Charging Contact Areas
Common Issues
* Clean monthly.
Rinse the filter repeatedly and tap it
to remove as much dirt as possible.
Note:
Do not touch the surface of the filter with your hands,
brush, or hard objects to avoid potential damage.
Scan the QR code below to view Common
Issues.
C6-3—
Use a soft dry cloth to wipe the charging
contacts on the charging dock and the
robot.
Allow 24 hours for the filter to dry
thoroughly and reinstall it.
Note: Purchase an additional filter and alternate if necessary.
Battery
C7 Water Tank
* Clean as required.
C7-1—
The robot is equipped with a built-in
high-performance lithium-ion rechargeable
battery pack. To maintain battery
performance, keep the robot charged
during normal use.
C7-2—
Note: If the robot will be left unused for a long period, turn it
off and charge it at least every three months to avoid battery
damage caused by over-discharge.
C7-3—
Open the water tank and fill it with
clean water.
Close the water tank and shake it
gently.
Pour out the remaining water as
shown.
Basic Parameters
C8 VibraRise Mop Cloth
Robot
* Clean after each use and replace every 3-6 months.
S80ULT
Model
C8-1—
14.4V/5200mAh (TYP)
lithium-ion battery
Battery
Rated Input
20VDC 1.2A
Remove the VibraRise mop cloth
from the VibraRise mop cloth mount.
Clean the VibraRise mop cloth and
air-dry it.
< 6 hours
Charging Time
Note: A dirty VibraRise mop will affect the mopping
performance. Clean it before use.
Note: The serial number is on a sticker on the underside of
the robot.
C9 Robot Sensors
Charging Dock
* Clean monthly.
CDZ12RR or CDZ20RR
Model
28W
Rated Power
Use a soft, dry cloth to wipe and clean all
sensors, including:
100-240VAC
Rated Input
20VDC 1.2A
Rated Output
Reactive 3D Obstacle Avoidance Sensor
C9-2—
Wall Sensor
C9-1—
50-60Hz
Rated Frequency
C9-3—
C9-4—
Carpet Sensor
Cliff Sensors
14.4V/5200mAh (TYP)
lithium-ion battery
Charging Battery
37